Saws, General Purpose, Handheld:

 Handheld Jarvis Saws for Every Application

 The Jarvis MODEL SEC180 electrically powered circular breaking saw.

--The SEC180, with an adjustable 2.6 inch (65mm) depth of cut, is ideally suited for:
Pork: ribbing, ham marking, shoulder marking, and removing contaminated back bones.
--Double insulated, 1.5HP electric motor for ultimate performance.
--Electronic brake for 3 second blade stop.
--Switch is protected against moisture and dirt for sustained trouble-free operation.
--Lightweight and flexible - allows operators to work with meat that is hanging or on the table.
--Meets national and international requirements for hygiene and safety. USDA and CE approved. Made to
VDE standards.

Specifications
Drive Electric
Motor Power 1.5HP 1150W
Operating Voltage
42V, 1 Phase, 50/60Hz
115V, 1 Phase, 50/60Hz
220V, 1 Phase, 50/60Hz
Blade Speed 1500 RPM
Control Handles
Single Trigger / Dual Handles Electric
Blade Diameter 7.1 in 180 mm
Cutting Depth (maximum) 2.6 in 65 mm
Overall Length 22 in 550 mm
Weight 13 lbs 6 kg

Equipment Selection and Accessories Order Number

42V, 1 Phase, 50/60Hz 4004047
115V, 1 Phase, 50/60Hz 4004048
22OV, 1 Phase, 50/60Hz 4004049
Blade 7.1 in / 180 mm 1023272
Balancer 4042002

 


THE JARVIS MODEL SEC230

ELECTRICALLY POWERED CIRCULAR BREAKING SAW

SMOOTH, POWERFUL, RUGGED

--The SEC230, with a 3 inch (75 mm) depth of cut, is ideally suited for cutting beef chucks, shoulders, ribs,
forequarters, hindquarters, chine bones, briskets, and loins
--Sealed, 1.9 HP electric motor for ultimate performance
--Short overall length and specially designed handles for easy handling
--Features electronic motor braking (eliminates mechanical brake wear)
--Smooth surface construction for easy cleaning and optimum hygiene
--Anti-tie down controls for operator safety
--Meets National and international requirements for hygiene and safety

SPECIFICATIONS
Drive: Electric
Motor Power: 1.9 HP 1400 W
Operating Voltage:
--230 V, 3 Phase, 60 Hz
--460 V, 3 Phase, 60 Hz  --other voltages and 50 Hz available
Blade Speed:
--50 Hz: 1360 RPM
--60 Hz: 1650 RPM
Control Handle: Electric Dual Anti-tie Down, 12 V
Brake: Electric
Blade Diameter: 9.1 in 230 mm
Cutting Depth (maximum): 3.0 in 75 mm
Overall Length: 24 in 610 mm
Weight: 39 lbs 17.7 kg

Equipment Selection and Accessories Order Number
Model SEC230 with control box
230V, 3 Phase, 60Hz 4004032
46OV, 3 Phase, 60Hz 4004036
Blade 9.1 in / 230 mm 1023286
Balancer 4042004

* For other configurations: please specify voltage, hertz, and intended country of operation when ordering.


THE JARVIS MODEL SEC280-4

ELECTRICALLY POWERED CIRCULAR BREAKING SAW

SMOOTH, POWERFUL, RUGGED

--The SEC280, with a 4 inch (100 mm) depth of cut, is ideally suited for cutting beef chucks, shoulders,
ribs, forequarters, hindquarters, chine bones, briskets, and loins
--Sealed, 2.25HP electric motor for ultimate performance
--Specifically designed handles for easy handling
--Features electronic motor braking (eliminates mechanical brake wear)
--Smooth surface construction for easy cleaning and optimum hygiene
--Anti-tie down controls for operator safety
--Meets National and international requirements for hygiene and safety

SPECIFICATIONS
Drive: Electric
Motor Power: 2.3 HP 1700 W
Operating Voltage:
--230 V, 3 Phase, 60 Hz
--460 V, 3 Phase, 60 Hz
--other voltages and 50 Hz available
Blade Speed:
--50 Hz: 1360 RPM
--60 Hz: 1650 RPM
Control Handle: Electric Dual Anti-tie Down, 12 V
Brake: Electric
Blade Diameter: 11.0 in 280 mm
Cutting Depth (maximum): 4.0 in 100 mm
Overall Length: 27 in 686 mm
Weight: 42 lbs 19 kg

Equipment Selection and Accessories Order Number
Model SEC280-04with control box
230V, 3 Phase, 60Hz 4004069
460V, 3 Phase, 60Hz 4004073
Blade 11.0 in/ 280 mm 1023288
Balancer 4042004

* For other configurations: please specify voltage, hertz, and intended country of operation when ordering.

 


The Jarvis Model SPC 140 pneumatically powered general purpose breaking saw.

--The right or left handed SPC 140, with a 1.5in (38 mm) depth of cut, is ideally suited for:Beef and pork
scribing, boning strip loins, hot and cold ribbing, and all fabricating cuts
--Lightweight and flexible - allows operators to use the tool both hanging and on the table.
--High efficiency air motor for more horsepower and lower operating cost.
--Heavy duty gears made to withstand all uses in the packing plant industry.
--New style USDA approved blade guard for easy internal sanitation.
--All stainless construction.
--Lever style adjustable depth gauge for precise depth control.
--Instant stop blade.
--Meets national and international requirements for hygiene and safety. USDA and CE approved.

Specifications
Drive Pneumatic
Motor Power 0.85HP 63OW
Operating Pressure 90 PSI 6.1 bar
Air Consumption 27.3 CFM 0.77 m3/Min
Blade Speed 1800 RPM
Vibration 122dB 1.26 m/sec2
Noise 93dB
Control Handle
Single Trigger Pneumatic
Blade Diameter 5.5 in 140mm
Cutting Depth (maximum) 1.5 in 38 mm
Overall Length 16.5 in 420 mm
Weight 5.85 lbs 2.65 kg

Equipment Selection and Accessories Order Number

Model SPC 165

Right Hand - Standard 4001027
Left Hand 4001033
Air Hose length 15 ft/5 m 3059018
Air Filter / Regulator / Lubricator 3022003
Blades
5.5 in / 140 mm 1023362
skip tooth blade 1023363

Optional:
Straight Handle 1019001
Balancer 4042022

 

The Jarvis Model SPC 165 pneumatically powered general purpose breaking saw.

--The right or left handed SPC 165, with a 2 in (51 mm) depth of cut, is ideally suited for:
Beef: ribbing, breaking forequarters, beef plates.
--Lightweight and flexible - allows operators to use the tool both hanging and on the table.
--High efficiency air motor for more horsepower and lower operating cost.
--Heavy duty gears made to withstand all uses in the packing plant industry.
--New style USDA approved blade guard for easy internal sanitation.
--All stainless construction.
--Lever style adjustable depth gauge for precise depth control.
--Instant stop blade.
--Meets national and international requirements for hygiene and safety. USDA and CE approved.

Specifications
Drive Pneumatic
Motor Power 0.85HP 63OW
Operating Pressure 90 PSI 6.1 bar
Air Consumption 27.3 CFM 0.77 m3/Min
Blade Speed 1800 RPM
Vibration 122dB 1.26 m/sec2
Noise 93dB
Control Handle
Single Trigger Pneumatic
Blade Diameter 6.5 in 165 mm
Cutting Depth (maximum) 2.0 in 51 mm
Overall Length 16.5 in 420 mm
Weight 5.85 lbs 2.65 kg
Equipment Selection and Accessories Order Number
Model SPC 165
Right Hand - Standard 4001028
Left Hand 4001034
Air Hose length 15 ft/5 m 3059018
Air Filter / Regulator / Lubricator 3022003
Blades
6.5 in / 165 mm 1023324
skip tooth blade 1023308

Optional:
Straight Handle 1019001
Balancer 4042022

 


 

THE JARVIS MODEL 600G

PNEUMATICALLY POWERED SCRIBE SAW

--The 600G, with a 3/4 in (19mm) depth of cut, is ideally suited for scribing beef
--Lightweight and flexible
--allow separators to work single handed, both hanging and on the table--Reduces operator fatigue
--Rear end exhaust and constructed from corrosion resistant materials for optimum hygiene
--Lever style adjustable depth gage for precise depth control and trouble-free operation
--Instant stop blade
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Drive: Pneumatic
Motor Power: 0.70 HP/522 W
Operating Pressure: 100 PSI, 6.8 bar
Air Consumption: 24 CFM 0.66m3/min
Blade Speed: 6000 RPM
Control Handle: Single Trigger, Pneumatic
Blade Diameter: 4.0 in/102 mm
Cutting Depth(maximum): 0.75 in/19 mm
Overall length : 14 in/352 mm
Weight: 4.4 lbs/2.0 kg

Equipment Selection and Accessories Order Number

Model 60OG 4001019

Air Hose length 15 ft / 5 m 3059018
Air Filter / Regulator / Lubricator 3022003
Blades
4.0 in / 102 mm blade 1023004
4.0 in / 102 mm, skip tooth blade 1023170

Optional: -
Balancer 4042022

 


 

THE JARVIS MODEL 700G

PNEUMATICALLY POWERED GENERAL PURPOSE BREAKING SAW

--The 700g, with a 2 in (51 mm) depth of cut, is ideally suited for ribbing beef, breaking forequarters, and
beef plates
--Lightweight and flexible--allow separators to work single handed, both hanging and on the table
--Reduces operator fatigue
--Rear end exhaust and constructed from corrosion resistant materials for optimum hygiene
--Lever style adjustable depth gage for precise depth control and trouble-free operation
--Instant stop blade
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Drive: Pneumatic
Motor Power: 0.70 HP/522 W
Operating Pressure: 100 PSI, 6.8 bar
Air Consumption: 25 CFM 0.70m3/min
Blade Speed: 2000 RPM
Control Handle: Single Trigger, Pneumatic
Blade Diameter: 6.5 in/165 mm
Cutting Depth(maximum): 2.0 in/51 mm
Overall length : 17 in/432 mm
Weight: 6.3 lbs/2.8 kg

Equipment Selection and Accessories Order number

Model 70OG 4001021

Air Hose length 15 ft / 5 m 3059018
Air Filter / Regulator / Lubricator 3022003
Blades
6.5 in / 165 mm blade 1023006
6.5 in / 165 mm, skip tooth blade 1023103

Optional:

'T' Handle - Middle 1019189
Balance 4042022

 


 

THE JARVIS MODEL 800-G PNEUMATICALLY POWERED SCRIBE SAW

--The Jarvis 800-gscribe saw is ideally suited for beef and pork scribing, boning strip loins, hot and cold
ribbing, and all fabricating cuts
-- -Lightweight and flexible--allow separators to work single handed, both hanging and on the table
--Reduces operator fatigue
--Lightweight with high-efficiency pneumatic motor
--Constructed from corrosion resistant materials for optimum hygiene
--Lever style adjustable depth gage for precise depth control and trouble-free operation
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Drive Pneumatic
Motor Power 0.7HP 522W
Operating Pressure 100 PSI 6.8 bar
Air Consumption 24 CFM 0.66 m 3 /min
Cut Speed 2000 RPM
Control Handle Single Trigger Pneumatic
Blade Diameter 5.5 in 140 mm
Cutting Depth (max.) 1.5 in 38 mm
Overall Length 16 in 413 mm
Weight 5.8 lbs 2.6 kg
Vibration 122 dB 1.26 m/sec 2
Noise (one meter from tool) 87 dB
Equipment Selection and Accessories Order number
800G 4001020
Air Hose 3059018
Balancer 4042022
Air Filter/Regulator/Lubricator 3022003

 


THE JARVIS MODEL 1000F

PNEUMATICALLY POWERED BREAKING SAW

--The 1000F, with a 3 in (76 mm) depth of cut, is ideally suited for beef chunks, shoulders, ribs,
forequarters, chine bones, briskets, loins, and aitch bones
--Large depth of cut, yet lightweight and flexible--reduces operator fatigue
--Constructed from corrosion resistant materials for optimum hygiene
--Instant stop blade
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Drive: Pneumatic
Motor Power: 1.0 HP 746 W
Operating Pressure: 100 PSI 6.8 bar
Air Consumption: 34 CFM 0.94 m3/min
Blade Speed: 1600 RPM
Control Handle: Single Trigger, Pneumatic
Blade Diameter: 9.0 in 229 mm
Cutting Depth(maximum): 3.0 in 76 mm
Overall length : 16 in 406 mm
Weight: 12.7 lbs 5.8 kg

Equipment Selection and Accessories Order Number

Model 1000F 4001012

Air Hose length 15 ft / 5 m 1059015
Air Filter / Regulator / Lubricator 3022003
Balancer 4042002
Blade 9.0 in / 229 mm 1023010

 


 

THE JARVIS MODEL SHC-140 & -165 ELECTRIC-HYDRAULIC SCRIBE SAWS

--The Jarvis SHC-140 & -165 scribe saws are ideally suited for beef and pork scribing, boning strip loins,
hot and cold ribbing, and all fabricating cuts
-- -Lightweight and flexible--allows operators to work single handed, both hanging and on the table
--New style blade guard for easy cleaning
--New heavy-duty bevel gears for durability in the most severe conditions
--New slim-line motor--the same size as our air saws!
--Heavy-duty bearing design
--New hydraulic motor with long-lasting needle bearings and seals
--Reduces operator fatigue
--Lightweight with hydraulic power--no bogging down, no motor icing, low noise, and instant stop
--Hydraulic for long trouble-free operation
--Constructed from corrosion resistant materials for optimum hygiene
--Lever style adjustable depth gage for precise depth control and trouble-free operation
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Drive Electric-Hydraulic
Motor Power 2.5HP 1865W
Blade Speed @ 3.5 GPM 2725 RPM
Control Handle Single trigger / Pneumatic
Blade Diameter
6.5 in 165 mm
5.5 in 140 mm
Cutting Depth (max.) 2.0 in 50.8 mm
1.5 in 38.1 mm
Overall Length 16.5 in 419 mm
Weight 7 lbs 3.2 kg
Vibration less than (<) 100 dB < 0.1 m/sec 2
Noise (one meter from tool) 87 dB
Electric Hydraulic Power Unit
Motor Power 5HP 3728W
Operating Voltage 230/460V, 3Ph, 60 Hz
Hose Length 16 ft. 4.9 m
Oil Capacity 20 gal 76 lOverall Dimensions 16 x 28 x 28 in 406 x 711 x 711 mm
Weight (without oil) 280 lbs 127 kg

Equipment Selection and Accessories Order number

Model SHC 140 4007028
Model SHC 140, Left Handed 4007037
Model SHC 165 4007029
Model SHC 165, Left Handed 4007032
Model SHC 165B, Brisket 4007036
Balancer 4042015
Hydraulic Power Unit 4027067
Blades
5.5 in / 140 mm 1023362
skip tooth blade 1023363
6.5 in / 165 mm 1023324
skip tooth blade 1023308

 


THE JARVIS MODEL 600-FS ELECTRIC-HYDRAULIC SCRIBE SAW

--The Jarvis 600-FS scribe saw is ideally suited for beef and pork scribing, boning strip loins, hot and cold
ribbing, and all fabricating cuts
-- -Lightweight and flexible--allow separators to work single handed, both hanging and on the table
--Reduces operator fatigue
--Lightweight with hydraulic power--no bogging down, no motor icing, low noise, and instant stop
--Hydraulic for long trouble-free operation constructed from corrosion resistant materials for optimum hygiene
--Lever style adjustable depth gage for precise depth control and trouble-free operation
--Meets national and international requirements for hygiene and safety

 SPECIFICATIONS
Motor Power 4HP 2983W
Blade Speed 2200 RPM
Control Handle Single / Pneumatic
Blade Diameter 4.0 in 102 mm
Cutting Depth (max.) 0.75 in 19 mm
Overall Length 13 in 330 mm
Weight (with hoses) 7.9 lbs 3.6 kg
Electric-Hydraulic Power Unit
Operating Voltage 230/460V, 3Ph, 60Hz
Hose Length 15 ft 5 m
Oil Capacity 20 gal 76 l
Overall Dimensions 32 x 18 x 34 in 813 x 458 x 864 mm
Weight (without oil) 200 lbs 91 kg

Equipment Selection and Accessories Order number

600-FS 4007011

Hydraulic Power Unit 4027041
4" Circular Saw Blade 90 Teeth 1023004
45 Teeth Skip Tooth 1023170

 


 

THE JARVIS MODEL 700FS

ELECTRIC-HYDRAULIC POWERED GENERAL PURPOSE BREAKING SAW

--The 700FS, with a 1.9 in (48 mm) depth of cut, is ideally suited for beef ribbing, breaking forequarters,
beef plates
--Lightweight with hydraulic power--no bogging down, no motor icing, low noise, and instant stop
--Rugged, corrosion resistant construction for optimum hygiene
--Hydraulic for long trouble-free operation
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Drive: Electric-hydraulic

MODEL 700FS

Motor Power: 4 HP/2983 W
Blade Speed: 2200 RPM
Control Handle: Single Trigger, Pneumatic
Blade Diameter: 6.5 in/165 mm
Cutting Depth (maximum): 1.9 in/48 mmOverall length : 17 in/425 mm
Weight: 10 lbs/4.7 kg

ELECTRIC-HYDRAULIC POWER UNIT
Motor Power: 5 HP/3728W
Operating Voltage: 230/460V, 3 Phase, 60 Hz - (other voltages and 50 Hz available)
Hose Length: 15 ft/5 m
Oil Capacity: 20 gal/76 L
Overall Dimensions: 31x21x34 in/787x533x864 mm
Weight (without oil): 181 lbs/82 kg

Equipment Selection and Accessories Order Number

Model 700FS 4007009

Electric-hydraulic Power Unit
with hydraulic hoses and control hoses
230/46OV, 3 Phase, 6OHz 4027067
Blades
6.5 in / 165 mm blade 1023006
6.5 in / 165 mm skip tooth blade 1023103

Optional:

'T' Handle - Middle 1019189
Balancer 4042015

 


THE JARVIS MODEL 800-FS ELECTRIC-HYDRAULIC SCRIBE SAW

--The Jarvis 800-FS scribe saw is ideally suited for beef and pork scribing, boning strip loins, hot and cold
ribbing, and all fabricating cuts
-- -Lightweight and flexible--allow separators to work single handed, both hanging and on the table
--Reduces operator fatigue
--Lightweight with hydraulic power--no bogging down, no motor icing, low noise, and instant stop
--Hydraulic for long trouble-free operation constructed from corrosion resistant materials for optimum hygiene
--Lever style adjustable depth gage for precise depth control and trouble-free operation
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Motor Power 4HP 2983W
Blade Speed @3.5 GPM 2200 RPM
Control Handle Single / Pneumatic
Blade Diameter 5.5 in 140 mm
Cutting Depth (max.) 1.25 in 31.8 mm
Overall Length 15 in 381 mm
Weight (with hoses) 9 lbs 4.1 kg
Electric-Hydraulic Power Unit
Motor Power 5HP 3728W
Operating Voltage 230/460V, 3Ph, 60Hz
Hose Length 16 ft 4.9 m
Oil Capacity 20 gal 76 l
Overall Dimensions 32 x 21 x 34 in 813 x 533 x 864 mm
Weight (without oil) 181 lbs 82 kg

Equipment Selection and Accessories Order number

800-FS 4007010

Hydraulic Power Unit 4027067
5.5" Circular Saw Blade 120 Teeth 1023005
60 Teeth Skip Tooth 1023104

 


THE JARVIS MODEL 1000FS

ELECTRIC-HYDRAULIC POWERED BREAKING SAW

--The 1000FS, with a 3 in to 41/2 in (76 mm to 114 mm) depth of cut, is ideally suited:
Beef: chucks, shoulders, ribs, forequarters, chine bones, briskets, loins, and aitch bones
Pork: chine bones and ham marking
--High powered hydraulic power--no bogging down, no motor icing, low noise, and instant stop
--Anti-tie down controls for operator safety
--Constructed from corrosion resistant materials for optimum hygiene
--Meets national and international requirements for hygiene and safety

SPECIFICATIONS
Drive: Electric-hydraulic
Motor Power: 8 HP 5966 W
Blade Speed: 2150 RPM
Control Handles: Electric Dual Anti-tie Down, 12 V
Blade Diameters:
--9.0 in 229 mm
--10.5 in 267 mm
--12.0 in 305 mm
Cutting Depths (maximum):
--with 9.0 in/ 229 mm blade: 3.0 in 76 mm
--with 10.5 in/ 267 mm blade: 3.75 in 95mm
--with 12.0 in/ 305 mm blade: 4.5 in 114mm
Overall length (with 12.0 in/305 mm blade) : 26 in/660 mm
Weight: 41 lbs/4.18.7 kg

ELECTRIC-HYDRAULIC POWER UNIT
Motor Power: 10 HP/7457 W
Operating Voltage: 230/460V, 3 Phase, 60 Hz - (other voltages and 50 Hz available)
Hose Length: 15 ft/5 m
Oil Capacity: 30 gal/114 L
Overall Dimensions: 33x25x31 in/838x635x787 mm
Weight (without oil): 268 lbs/122 kg

Equipment Selection and Accessories Order Number

Model 1000-FS with 9.0 in / 229 mm blade 4007006
with 10.5 in / 267 mm blade 4007007
with 12.0 in / 305 mm blade 4007008

Electric-hydraulic Power Unit with hydraulic hoses
and control cable 230/46OV, 3 Phase, 6OHz 4027042
Balancer 4042004
Blades
9.0 in / 229 mm blade 1023102
10.5 in / 267 mm blade 1023111
12.0 in / 305 mm blade 1023112